Bell RS7C LTWT Carbon SA2020 Helmet

• RS7C LTWT was developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy-absorbing liner system, and the performance features of the HP7 to create the most advanced, lightweight Snell rated helmet that can be used in North America’s most demanding forms of racing.

• Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, and the ability to be used with or without ear cups in an ultra-lightweight configuration and delivered race-ready under 2.795 pounds. Always up to the challenge, Bell delivered with the innovative Bell RS7C LTWT.

• Certifications: Snell SA2020 approved.

• Note regarding sizing: This helmet range includes a 61+ size, which is 0.5cm larger than a size 61.

• Manufacturing Part Number: 1237AXX.

• Aerospace-grade ultra-lightweight carbon shell.

• Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.

• Multi-purpose fit system that can be used with or without ear cups (ear cups included).

• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility.

• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation.

• Interior ventilation channels enhanced to maximize airflow.

• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities.

• Integrated channels in face piece offer multiple options to install drink tubes and radio systems.

• Rear spoilers, top gurney, and chin bar gurneys are available separately.

• Forced air attachments available separately.

• Factory installed Hans anchors as original equipment.

• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet.

• Shield and pivot kit: SE07 3mm, SV(SE07, SE077).

• Homologation: Snell SA2020 approved.

• RS7C LTWT Carbon Helmet

• Clear SE07 3mm Shield Installed

• Draw String Helmet Bag

• Clear Air Intake

• Plastic Tearoff Posts Installed

• Hex Wrench Key

RS7C LTWT

#1237A01: 6 3/4 (54) RS7C LTWT

#1237A02: 6 7/8 (55) RS7C LTWT

#1237A03: 7 (56) RS7C LTWT

#1237A04: 7+ (56+) RS7C LTWT

#1237A05: 7 1/8- (57-) RS7C LTWT

#1237A06: 7 1/8 (57) RS7C LTWT

#1237A07: 7 1/4 (58) RS7C LTWT

#1237A08: 7 3/8 (59) RS7C LTWT

#1237A09: 7 3/8+ (59+) RS7C LTWT

#1237A10: 7 1/2 (60) RS7C LTWT

#1237A11: 7 5/8 (61) RS7C LTWT

#1237A12: 7 5/8+ (61+) RS7C LTWT

SE07 3MM Replacement Shields

#2010041: SE07 3MM Clear DSAF

#2010042: SE07 3MM Smoke DSAF

#2010043: SE07 3MM Dark DSAF

#2010045: SE07 3MM Silver Mirror DSAF

#2010046: SE07 3MM Gold Mirror DSAF

#2010047: SE07 3MM Blue Mirror DSAF

#2010048: SE07 3MM Pink/Red Mirror DSAF

#2010049: SE07 3MM Irridium Mirror DSAF

#2010050: SE07 3MM ML Red DSAF

#2010051: SE07 3MM ML Blue DSAF

#2010052: SE07 3MM ML Green DSAF

#2010057: SE07 3MM Yellow DSAF

RS7C LTWT SE07 Tearoffs

#10235C: SE07 Racing Optics (VP) X Stack (10) 2Mil

#10237C: SE07 Racing Optics X Stack (10) 2Mil

#10237CP: SE07 Racing Optics X Stack (10) 2Mil Perimeter Seal

#3435C4: SE07 Racing Optics (VP) Speed Stack (3) 4Mil

#3436C4: SE07 Racing Optics Speed Stack (3) 4Mil

#2030002: SE07 Tear-Offs HQ .25MM (10)

#2030021: 2Mil SE07 (Thin) Tear-Offs 01227 (20)

#2030022: 5Mil SE07 (Thick) Tear-Offs 01527 (10)

#2030036: 2Mil SE07 (Thin) Smoke Tear-Offs 01227 (5)

Pulse Tearoff Posts

#ATP001BK: Pulse Aluminum Tear Off Post Black

#ATP001BL: Pulse Aluminum Tear Off Post Blue

#ATP001G: Pulse Aluminum Tear Off Post Gold

#ATP001GR: Pulse Aluminum Tear Off Post Green

#ATP001R: Pulse Aluminum Tear Off Post Red

#ATP001S: Pulse Aluminum Tear Off Post Silver

#LTP001BK: Pulse Lockdown Tear Off Post With Tools Black Anodized

#LTP001BK: Pulse Lockdown Tear Off Post Replacement Parts Kit

SV (SE07, SE077) Pivot Kit

#2020011: SV (SE07, SE077) Pivot Kit & Screws Black

#2020012: SV (SE07, SE077) Pivot Kit & Screws Blue

#2020013: SV (SE07, SE077) Pivot Kit & Screws Red

#2020014: SV (SE07, SE077) Pivot Kit & Screws Silver

#2020015: SV (SE07, SE077) Pivot Kit & Screws Gold

#2020016: SV (SE07, SE077) Pivot Kit & Screws Purple

#2020017: SV (SE07, SE077) Pivot Kit & Screws Green

#2020018: SV (SE07, SE077) Pivot Kit & Screws Pink

RS7 Chin Bar Guard (Carbon)

#2080062: RS7 Chin Bar Guard Kit (Carbon)

HP7 Visor Panel

#2010251: Zylon Visor Panel (SE07) Kit

HP7 / RS7C LTWT Air Intake

#2060041: HP7 Air Intake Kit Clear (2PCS)

#2060042: HP7 Air Intake Side Kit Clear (2 PCS)

#2060043: HP7 Air Intake Side Extractors Kit Clear (2PCS)

#2060044: HP7 Air Intake Kit Clear (4PCS)

#2060045: HP7 Air Intake Low Profile Kit Clear (2PC)

#2060051: HP7 Air Intake Kit Carbon Finish (2PC)

#2060052: HP7 Air Intake Kit Side Carbon Finish (2PC)

#2060053: HP7 Air Intake Kit Carbon Finish (4PC)

HP7 / RS7 Rear Spoiler

#2050031: HP7 Rear Spoiler Clear

#2050032: HP7 Rear Spoiler (V15) F1 Clear Small

#2050033: HP7 Rear Spoiler (V15) F1 Clear Medium

#2050034: HP7 Rear Spoiler (V15) F1 Clear Large

HP7 / RS7 Chin Bar & Top Gurney

#2050061: HP7 Chin Bar Gurney Clear Medium

#2050062: HP7 Chin Bar Gurney Clear Large

#2050083: Top Gurney Clear Large 6.55MM

Breath Deflector

#2110001: Breath Deflector V10

Chin Cover Seal

#2110014: Chin Cover Seal V10 Grey (X-small) 25MM

#2110015: Chin Cover Seal V10 Grey (Small) 40MM

#2110016: Chin Cover Seal V10 Grey (Medium) 55MM

#2110014: Chin Cover Seal V10 Grey (Large) 80MM

HP / RS7 Carbon Forced Air

#2070091: Top Air Eyeport V05 Nozzle Clear

#2070092: Top Air Eyeport V05 Nozzle Carbon Fiber

#2070095: Top Air Eyeport V05 45/90 Clear

#2070096: Top Air Eyeport V05 Nozzle 45/90 Carbon Fiber

#2070099: Top Air Eyeport QL V10 Nozzle Clear

#2070100: Top Air Eyeport QL V10 Nozzle Carbon Fiber

#2070112: 8 Hole Top Air V05 Nozzle Carbon Fiber

#2070116: 8 Hole Top Air V05 45/90 Nozzle Carbon Fiber

#2070120: 8 Hole Top Air QL V10 Nozzle Carbon Fiber

#2070131: 10 Hole Top Air V05 Nozzle Clear

#2070132: 10 Hole Top Air V05 Nozzle Carbon Fiber

#2070135: 10 Hole Top Air V05 45/90 Nozzle Clear

#2070136: 10 Hole Top Air V05 45/90 Nozzle Carbon Fiber

#2070139: 10 Hole Top Air QL V10 Nozzle Clear

#2070140: 10 Hole Top Air QL V10 Nozzle Carbon Fiber

#2070171: Top F/Air Low Intake QL V10 HP5/HP7 Carbon

HANS Post Anchor Clip Sets

#2100001: Hans Clip Set Silver

#2100002: Hans Clip Set Black

#2100003: Hans Clip Set Blue

#2100004: Hans Clip Set Green

#2100005: Hans Clip Set Red

#2100006: Hans Clip Set Pink

#2100007: Hans Clip Set Gold

#2100008: Hans Clip Set Purple

Helmet Bags

#2120001: HP Helmet Bag

#2120002: Helmet & Hans Black Quilted Bag

#2120012: Fleece Black Bag (V16)

#2120013: Victory R1 Bag (V15)

#2120014: Hans Pro V2 Bag (V15)

#2120015: Pro V2 Roller Bag (V15)